Our product portfolio
Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.
Horizontal plate clamp type JPD (LC) RX-lift
• EN 13155
• horizontal lifting and transport of thin steel plates, beam profiles and bending sheets
• reverse jaw enables transport of the sheets that tend to bend during lifting or manipulation of beam profiles (gripping on the side of the beam or profile flipping)
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal plate clamp type PPD RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal plate clamp type THK RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal steel and concrete pipe clamp type TPH RX-lift
Hvataljka za čelične cijevi tip YG RX-lift
Hydraulic bottle jack type BJ-A RX-lift
Hydraulic cylinder with hand pump Simson Power Tools
• hydraulic cylinder with hand pump Simson Power Tools
• lift piston of hardened high strength and corrosion resistant steel
• roller polished cylinder of hardened high strength steel
• safety valve on the pump side set to 825 bar
• dimensioned against overloading with safety factor 3:1
• dimensioned against break with safety factor 4:1
• working pressure 825 bar
• 3-year material warranty and operation on piston and cylinder
• optional gauge
Hydraulic hand pump type HHB-700 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• hydraulic hand pump for hydraulic cylinder
• robust and durable design
• ergonomic operating handle
Features:
• working pressure: 700 bar
• overload protection (internal relief valve)
• 1,80 m high-pressure hose with half coupler
• half coupler: R2 3/8''
• built-in pressure gauge
* the hand pump model HHB-700S contains 2 hoses that enable control of 2 hydraulic cylinders, without the need to connect them (it is not possible to control both cylinders at the same time!)
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Lever chain hoist type HSH-A619 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• optimized load chain guidance system.
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• brake system: automatic safety load brake with two friction discs , ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)



