Our product portfolio

Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.

Hand winch type BHW RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort

Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL

* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)

This product has multiple variants. The options may be chosen on the product page

Hand winch type DSHW-E RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable only for pulling applications
• automatic load pressure break and free spooling mode
• efficient gearing minimises the required operator effort

Features:
• compact design with detachable lever with ratchet and pawl
• comfortable handle with easy grip
• material: steel (powder coated)
• supplied without steel wire rope
• minimum load: 5 % WLL

* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 40 m with swaged hard eye and eye hook with safety latch at the end)

This product has multiple variants. The options may be chosen on the product page
Sold out

Heavy duty transport rotating dolly with handle type WCRP RX-lift

• heavy duty transport trolley (dolly) with rotating disc and wheels
• polyurethane (PU) wheels
• use only on hard, flat and firm surfaces
• the trolley comes with a handle for manipulation

This product has multiple variants. The options may be chosen on the product page

Heavy duty transport trolley, types CRO and CRA RX-lift

• CRA with rotating disc
• CRO without disc
• use on a flat and clean surface

Horizontal beam clamp type TMC RX-lift

• EN 13155
• horizontal lifting and transport of beam profiles, plates, sheets and sheet stacks
• use with two-leg sling or spreader beam
• the wide, split lower jaw is particularly suitable for gripping beam profiles & girders (gripping at the ends or on the side of the beam)
• safety lock mechanism in open and close position
• temperature of use form -40 do 100 °C

This product has multiple variants. The options may be chosen on the product page

Horizontal lifter type PDK RX-lift

• EN 13155
• large opening grips
• use in pairs
• Simple clamping mechanism to adjust the gripper opening
• designed to transfer a larger amount of plates at once
• Do not use at temperatures above 100°C
• Do not lift stainless steel or copper plates
• Use a load-bearing beam / yoke when transporting longer loads

Horizontal lifter type TCH RX-lift

• EN 13155
• use in pairs, transport of steel plates min. 5mm thick
• use 1 pair of clamp on 2-leg sling up to 1500mm in length, for
larger boards use a lifting beam with more clamp pairs
• Do not load sideways
• Use at temperatures below 100 °C

Horizontal lifter, for stainless steel plates and constructions type STS-A RX-lift

• EN 13155
• usage: lift and transport stainless steel plates and structures in a horizontal position
• for safe transport, the gripper surface must be dry, clean and
non-greasy, free of any lubricant or dust
• Do not use on smooth, polished surfaces as they have various
lubricating compounds on them
• must clean the jaw of the gripper regularly in clean water, do not use solvents
• must check the handle before each use, make sure that it is
clean and undamaged, otherwise remove it from use

Horizontal plate clamp type HPC RX-lift

• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)