Our product portfolio

Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.

Lever chain hoist type HSH-A816 RX-lift

• EN 13157
• load chain EN 818-7, el. galvanized
• lever hoist
• brake at zero position
• lightweight and sturdy steel body
• cast upper and lower hook
• body finish: double lacquered (green)

Lever chain hoist type HSH-A816 RX-lift PREMIUM

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings with cage
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• ergonomic lever with rubber sleeve
• optimized load chain guidance system.

Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• overload protection: installation possibility
• brake system: automatic safety load brake with integrated two sintered friction discs and ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)

Premium features:
• enhanced compact housing and smaller lever -> reduced weight and easier handling and operating
• enhanced gear and axle bearings -> increased stability and effectiveness during operation
• improved cylindrical roller bearings with a cage -> better corrosion resistance
• enhanced brake system, integrated sintered friction discs and ratchet disc -> increased efficiency and durability of the brake system, easier disassembly
• enhanced cast steel hand wheel -> hand wheel of increased strength and reliability allows free spooling mode
• no minimum preload required to activate ratchet mechanism
• the hooks contain reference measuring points for controlling the dimensions of the hook opening -> easier control of the condition (deformation) and correctness of the hook, increased safety

This product has multiple variants. The options may be chosen on the product page

Low Height Hydraulic Cylinder (multi-stage) type HHYG-D RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• multi-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder

Features:
• working pressure: 700 bar
• cylinder performance: multi stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''

*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity

This product has multiple variants. The options may be chosen on the product page

Low Height Hydraulic Cylinder (one-stage) type HHYG-B RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• one-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder

Features:
• working pressure: 700 bar
• cylinder performance: one stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''

*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity

This product has multiple variants. The options may be chosen on the product page

Magnetic hand lifter MAG50

• EN 13155
• lifting and transport of the ferromagnetic materials like plates and blocks up to 50 kg
• temperature of use from -10 °C to 60 °C
• safety factor: 3:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is attached
• can only be used for handling material manually (lifting of load fixed to a magnetic hand lifter with another lifting equipment is forbidden)

This product has multiple variants. The options may be chosen on the product page
Sold out

Manual anti-corrosion chain hoist type SS-F3 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity), maintenance friendly design, brake and transmission are easy to access
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water

Features:
• hooks: drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• humidity: up to 100 % (not suitable for underwater use)
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible trolleys for manual chain hoist: type SSGLC 810 (compact)
• possibility of installing chain bag

Manual chain hoist type HSZ-A619 CROM RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, chrome-plated with increased wear and corrosion protection, withstands external impacts without damaging the bearings and provides protection against dust and water

Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: chrome-plated galvanized acc. to EN 818-7 (type T)
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls

This product has multiple variants. The options may be chosen on the product page

Manual chain hoist type HSZ-A619 RAL 9011 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered (RAL 9011), withstands external impacts without damaging the bearings and provides protection against dust and water
• for entertainment industry ( stage etc.)

Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: black acc. to EN 818-7 (type T)
• hand chain: black
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
• chain bag

Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible beam clamp type JG RAL 9011
• using with endless wire rope sling with polyester protections sleeve RAL 9011

This product has multiple variants. The options may be chosen on the product page
Sold out

Manual chain hoist type HSZ-A619 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water

Features:
• hooks: drop-forged steel hooks wit cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• overload protection: no
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible trolleys for manual chain hoist: type GCT 810 (standard) and GCL 810 (compact)
• possibility of installing chain bag

Manual chain hoist type HSZ-A810 RX-lift

• EN 13157
• load chain EN 818-7, el. galvanized
• double breaking system
• lightweight and sturdy steel body
• cast upper and lower hook
• housing finish: double lacquered (green)
• compatible with trolleys for that manual chain hoist: type GCT (standard) and GCL (chain operated)

• less chain fall number (compared to the model HSH-A619)

Manual chain hoist type HSZ-A810 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water

Features:
• fewer load chain falls compared to the HSZ-A619 model
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible trolleys for manual chain hoist: type GCT 810 (standard) and GCL 810 (compact)
• possibility of installing chain bag

This product has multiple variants. The options may be chosen on the product page