Hydraulic hand pump type HHB-700 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• hydraulic hand pump for hydraulic cylinder
• robust and durable design
• ergonomic operating handle
Features:
• working pressure: 700 bar
• overload protection (internal relief valve)
• 1,80 m high-pressure hose with half coupler
• half coupler: R2 3/8”
• built-in pressure gauge
* the hand pump model HHB-700S contains 2 hoses that enable control of 2 hydraulic cylinders, without the need to connect them (it is not possible to control both cylinders at the same time!)
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• hydraulic hand pump for hydraulic cylinder
• robust and durable design
• ergonomic operating handle
Features:
• working pressure: 700 bar
• overload protection (internal relief valve)
• 1,80 m high-pressure hose with half coupler
• half coupler: R2 3/8”
• built-in pressure gauge
* the hand pump model HHB-700S contains 2 hoses that enable control of 2 hydraulic cylinders, without the need to connect them (it is not possible to control both cylinders at the same time!)
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Related products
Electric foot mounted hoist type SH6 4/1 RX-lift
• crane housing welded with special high steel performance
• single speed motor: conical, two speed motor: cylindrical
• modularly designed control panel
• possibilities: protection against phase loss, protection against phase difference, protection against too strong el. energy, inverter speed control
Electric standard headroom traveling hoist type SH6 2/1 RX-lift
• crane housing welded with special high steel performance
• single speed motor: conical, two speed motor: cylindrical
• modularly designed control panel
• possibilities: protection against phase loss, protection against phase difference, protection against too strong el. energy, inverter speed control
Electric standard headroom traveling hoist type SH6 2/1 RX-lift
• crane housing welded with special high steel performance
• single speed motor: conical, two speed motor: cylindrical
• modularly designed control panel
• possibilities: protection against phase loss, protection against phase difference, protection against too strong el. energy, inverter speed control
Hydraulic cylinder with hand pump Simson Power Tools
• hydraulic cylinder with hand pump Simson Power Tools
• lift piston of hardened high strength and corrosion resistant steel
• roller polished cylinder of hardened high strength steel
• safety valve on the pump side set to 825 bar
• dimensioned against overloading with safety factor 3:1
• dimensioned against break with safety factor 4:1
• working pressure 825 bar
• 3-year material warranty and operation on piston and cylinder
• optional gauge
Low Height Hydraulic Cylinder (multi-stage) type HHYG-D RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• multi-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder
Features:
• working pressure: 700 bar
• cylinder performance: multi stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Low Height Hydraulic Cylinder (one-stage) type HHYG-B RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• one-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder
Features:
• working pressure: 700 bar
• cylinder performance: one stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity


