Our product portfolio
Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.
Snatch block 200kg with swivel hook RX-B103 RX-lift
• snatch block 200kg with swivel hook RX-B103 RX-lift
• sheave diameter 165 mm
• possibility of mounting ropes up to 20 mm in diameter (polyester (PES) 3-strand or polyester (PES) braided)
• arbitrary rope length (possibility of splicing a loop (soft eye), thimble (hard eye), hook, etc.)
Snatch block with hook DSPB-F1
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook
Snatch block with shackle for forestry logging DS-B029 RX-lift
Spark proof ATEX lever hoist type EX-L3 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments, maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: copper-plated drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
Spring balancer type HW
Specifications:
• balancing, hanging and manipulation of various hand tools such as electric or pneumatic screwdrivers, hand marking machines, measuring instruments, etc.
Transport trolley RX-lift
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm
Travel end stop for hoist trolleys RX-lift
• travel end stop for hoist trolleys
• possibility of adjusting the width depending on the size of the beam
• suitable for beam profiles with a maximum width of 300 mm
• different configuration (A, B i C)
Ultra-low height hydraulic cylinder (one-stage) type HHYG-CCB RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• ultra-low one-stage hydraulic cylinder for lifting loads
• ultra-low cylinder suitable for use where there are space constraints (e.g. narrow spaces)
• design suitable for use in all positions
• working pressure: 700 bar
• cylinder performance: one stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Universal plate clamp type IPU10 Crosby
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 37 HRC (450 HB)
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C
• 10 year of warranty
• manufacturers web page: https://www.thecrosbygroup.com/products/lifting-clamps/vertical/standard/crosby-ipu10-vertical-lifting-clamps/?language=en



