Lever chain hoist type HSH-A619 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• optimized load chain guidance system.
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• brake system: automatic safety load brake with two friction discs , ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• optimized load chain guidance system.
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• brake system: automatic safety load brake with two friction discs , ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)
| Model | |
|---|---|
| Capacity (t) | |
| Proof load (kN) | |
| Load chain dim. (mm) | |
| Chain Fall | |
| Standard lifting height (m) | |
| Load lifting force (N) | |
| A (mm) | 17,6, 195, 148 |
| B (mm) | 109, 102, 88 |
| C (mm) | 135, 162, 211, 254, 319 |
| H min. (mm) | 320, 380, 480, 620, 700, 318 |
| L (mm) | 290, 420 |
| D (mm) | 85, 37, 64, 45, 50 |
| K (mm) | 26, 32,5, 50, 38, 48 |
| Net weight (kg) | |
| Ext. weigh. per 1 m chain (kg) |
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Hand winch type BHW RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort
Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL
* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)
Plain sparkproof trolley type EXGCT ATEX RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels and suspension plate (link) are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)
Snatch block with shackle for forestry logging DS-B029 RX-lift
Transport trolley RX-lift
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm


