Transport trolley RX-lift
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm
| Model |
|---|
| Capacity (kg) |
Related products
Beam clamp type WJC RX-lift
Concrete pipe clamp type PLG RX-lift
• EN 13155
• vertical transportation of concrete pipe sections up to 2 m in diameter
• clamps are used in combination with three-leg sling in sets of three clamps
• total capacity is stated for sets of three clamps
• clams have solid construction and simple manipulation
• for concrete according to DIN 4034
Drum clamp type LQ RX-lift
Hand winch type BHW RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort
Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL
* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


