Snatch block with hook DSPB-F1
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook
| Capacity (t) | 0,5, 1,0, 2,0 |
|---|---|
| Test force (kN) | |
| Rope diameter | |
| H (mm) | 730, 1150, 230, 1480, 315, 260, 470, 570, 40,5, 810, 1010 |
| H1 (mm) | 783 |
| B (mm) | 316, 452, 212, 580, 116, 176, 280, 90, 152, 406, 98 |
| Lmax (mm) | 79, 90, 105, 125, 144, 240, 169, 180, 48, 54, 63 |
| Φ (mm) | 37,5, 85, 28, 75, 45, 106, 50, 118, 60, 140, 31,5 |
| Weight (kg) |
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Beam clamp type WJC RX-lift
Drum clamp type LQ RX-lift
Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


