Manual anti-corrosion chain hoist type SS-F3 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity), maintenance friendly design, brake and transmission are easy to access
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• humidity: up to 100 % (not suitable for underwater use)
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible trolleys for manual chain hoist: type SSGLC 810 (compact)
• possibility of installing chain bag
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity), maintenance friendly design, brake and transmission are easy to access
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• humidity: up to 100 % (not suitable for underwater use)
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing compatible trolleys for manual chain hoist: type SSGLC 810 (compact)
• possibility of installing chain bag
| Model | |
|---|---|
| Capacity (t) | |
| Standard lifting height (m) | |
| Load lifting force (N) | |
| Chain Fall | |
| Load chain dim. (mm) | |
| A (mm) | 255, 40,5, 640, 280, 148, 385, 172, 196, 210 |
| B min (mm) | 175, 205, 189, 242, 132, 226, 151, 173 |
| C (mm) | |
| D (mm) | 45, 110, 50, 40, 35, 65, 55, 85 |
| H min (mm) | 442, 920, 580, 980, 690, 345, 376, 780, 470 |
| Net weight (kg) |
Related products
Concrete pipe clamp type PLG RX-lift
• EN 13155
• vertical transportation of concrete pipe sections up to 2 m in diameter
• clamps are used in combination with three-leg sling in sets of three clamps
• total capacity is stated for sets of three clamps
• clams have solid construction and simple manipulation
• for concrete according to DIN 4034
Drum clamp type TDV RX-lift
Hand winch type BHW RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort
Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL
* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)
Plain sparkproof trolley type EXGCT ATEX RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels and suspension plate (link) are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


