Horizontal beam clamp type TMC RX-lift
• EN 13155
• horizontal lifting and transport of beam profiles, plates, sheets and sheet stacks
• use with two-leg sling or spreader beam
• the wide, split lower jaw is particularly suitable for gripping beam profiles & girders (gripping at the ends or on the side of the beam)
• safety lock mechanism in open and close position
• temperature of use form -40 do 100 °C
• EN 13155
• horizontal lifting and transport of beam profiles, plates, sheets and sheet stacks
• use with two-leg sling or spreader beam
• the wide, split lower jaw is particularly suitable for gripping beam profiles & girders (gripping at the ends or on the side of the beam)
• safety lock mechanism in open and close position
• temperature of use form -40 do 100 °C
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Drum clamp type LQ RX-lift
Drum clamp type LR RX-lift
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)
Snatch block with hook DSPB-F1
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook


