Our product portfolio
Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.
High tensile steel bow shackle with screw collar pin G209 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel bow shackle which allows quick assembly/disassembly
• suitable for use where assembly and disassembly occur relatively frequently
• intended for use in 1-leg or multi-leg systems/configurations (e.g. 1-leg or 2-leg steel wire rope slings)
Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized or bright
• working temperature: -40°C up to +200°C
High tensile steel dee shackle with safety bolt G2150 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel dee shackle with safety bolt, nut and cotter pin that accidental unscrewing of the bolt
• for use in permanent joints where assembly and disassembly are infrequent
• intended for use in 1-leg systems/configurations only (e.g. 1-leg steel slings)
Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized
• working temperature: -40°C up to +200°C
High tensile steel dee shackle with screw collar pin G210 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel dee shackle which allows quick assembly/disassembly
• suitable for use where assembly and disassembly occur relatively frequently
• intended for use in 1-leg systems/configurations only (e.g. 1-leg steel wire rope slings)
Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized or bright
• working temperature: -40°C up to +200°C
Horizontal beam clamp type TMC RX-lift
• EN 13155
• horizontal lifting and transport of beam profiles, plates, sheets and sheet stacks
• use with two-leg sling or spreader beam
• the wide, split lower jaw is particularly suitable for gripping beam profiles & girders (gripping at the ends or on the side of the beam)
• safety lock mechanism in open and close position
• temperature of use form -40 do 100 °C
Hydraulic bottle jack type BJ-A RX-lift
Hydraulic hand pump type HHB-700 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• hydraulic hand pump for hydraulic cylinder
• robust and durable design
• ergonomic operating handle
Features:
• working pressure: 700 bar
• overload protection (internal relief valve)
• 1,80 m high-pressure hose with half coupler
• half coupler: R2 3/8''
• built-in pressure gauge
* the hand pump model HHB-700S contains 2 hoses that enable control of 2 hydraulic cylinders, without the need to connect them (it is not possible to control both cylinders at the same time!)
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Lifting chain Grade 8 RX-lift
Specification:
• according to EN 818-2 (DIN 5687)
• high tensile steel chain for lifting and lashing purposes
• most often used as part of lifting chain sling (EN 818-4) or lashing chain with ratchet load binder (EN 12195-3)
• intended for dynamic and static loads
Features:
• material: high tensile steel grade 8
• safety factor: 4:1
• calibrated chain links: max. dimensional deviation +/- 3%
• working temperature: -40 °C to +200 °C (WLL 100 %)
• finish: electrophoresis (black) or natural color
Additional features:
• available compatible elements grade 8
• available chains with increased surface hardness
Low Height Hydraulic Cylinder (multi-stage) type HHYG-D RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• multi-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder
Features:
• working pressure: 700 bar
• cylinder performance: multi stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Low Height Hydraulic Cylinder (one-stage) type HHYG-B RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• one-stage hydraulic cylinder for lifting loads
• compact design suitable for use in confined spaces
• design suitable for use in all positions
• grooves on the cylinder piston improve lubrication, reduce friction and ensure precision and stability of the cylinder
Features:
• working pressure: 700 bar
• cylinder performance: one stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''
*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity
Magnetic hand lifter MAG50
• EN 13155
• lifting and transport of the ferromagnetic materials like plates and blocks up to 50 kg
• temperature of use from -10 °C to 60 °C
• safety factor: 3:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is attached
• can only be used for handling material manually (lifting of load fixed to a magnetic hand lifter with another lifting equipment is forbidden)
Manual balancing crane fork telescopic in height type CK RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• crane fork lifting loads (pallets) with adjustable telescopic height system
• contains sliding ring for manual balancing
• manual adjustable tines
Manual chain hoist type HSZ-A619 CROM RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, chrome-plated with increased wear and corrosion protection, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: chrome-plated galvanized acc. to EN 818-7 (type T)
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls

