Our product portfolio

Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.

Stupni konzolni okretni kran tip JC-RM RX-lift

Specifikacija:
• sukladno Direktivi o strojevima 2006/42/EC
• samostojeći stupni konzolni okretni kran (dizalica) s monorail tračnim kolicima i dizalicom namijenjen za lokalizirano dizanje/spuštanje i manipulaciju tereta težine do 1000 kg
• sastoji se od vertikalnog čeličnog stupa usidrenog u betonsku podlogu, horizontalne aluminijske grane koja podupire monorail tračna kolica i dizalicu
• proizvoljan odabir specifikacija stupnog konzolnog krana: kapacitet (nosivost), visina dizanja, dužina grane (ruke), maksimalni kut okretanja, vrste kolica, vrste dizalice i boja
• primjena: radionice, proizvodni pogoni, skladišta

Značajke:
• stup: vertikalni čelični okrugli
• baza stupa (prirubnica): okrugla
• grana (ruka): horizontalni hladno savijeni monorail tračni kanal (za viseća kolica)
• materijal grane (ruke): aluminij
• kut okretanja grane: 270° ili 360°
• način okretanja grane: ručno
• kolica: ručna tračna kolica (sa sistemom za napajanje dizalice)
• dizalica: električna (npr. tip SHH-A RX-lift 380V ili tip TC RX-lift 230V/380V)
• boja: žuta RAL 1028 (ili proizvoljna)

Montaža:
• manji kapaciteti i dužine grane -> bazna prirubnica se pričvršćuje na podlogu s pomoću dinamičkih sidrenih vijaka manjih promjera
• veći kapaciteti i dužine grane -> bazna prirubnica se pričvršćuje na podlogu s pomoću pravokutne podne međuploče i dinamičkih sidrenih vijaka većih promjera

*kako bi se jasno definirale sve potrebne karakteristike stupnog krana potrebno je kontaktirati odjel prodaje i/ili ispuniti obrazac upita priložen unutar tehničkog lista (izbornik KATALOG)

This product has multiple variants. The options may be chosen on the product page

Swivel eye-eye(round) G401 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC
• swivel eye-eye(round) that can be used under water
• available working load limit from 0,39 t up to 20,5 t

Features:
• safety factor: 5:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized

This product has multiple variants. The options may be chosen on the product page

Swivel hook with bearing and safety latch G80 RX788

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-2
• swivel hook with safety latch intended for use with chain or wire rope slings
• solid latch helps retain the lifting point within the hook and ball-bearing swivel eye allows rotation both loaded and unloaded

Features:
• safety factor: 4:1
• bearing: ball bearing
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C

Swivel hook with safety latch G80 RX268

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-2
• swivel hook with safety latch intended for use with chain or wire rope slings
• solid latch helps retain the lifting point within the hook

Features:
• safety factor: 4:1
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C

Swivel selflocking hook G80 RX083

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-3
• swivel hook with safety latch intended for use with chain or wire rope slings
• solid latch helps retain the lifting point within the hook
• self-locking hook automatically locks closed under tension and cannot open while loaded

Features:
• safety factor: 4:1
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C

Travel end stop for hoist trolleys RX-lift

• travel end stop for hoist trolleys
• possibility of adjusting the width depending on the size of the beam
• suitable for beam profiles with a maximum width of 300 mm
• different configuration (A, B i C)

This product has multiple variants. The options may be chosen on the product page

Trolley for electric chain hoist type T RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• trolley intended for installation on an electric chain hoist type SHH-A (SHH-T) or an electric chain hoist type TC (TCP)
• easy installation on beams, "I" beams (IPE) and "H" beams (HEA, HE, HL, HD)
• the possibility of adjusting the width of the cart with the help of washers in nuts

Features:
• wheels: cast

Additional features:
• the possibility of delivering carts with a larger width (for larger beams)

This product has multiple variants. The options may be chosen on the product page

Ultra-low height hydraulic cylinder (one-stage) type HHYG-CCB RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1494
• ultra-low one-stage hydraulic cylinder for lifting loads
• ultra-low cylinder suitable for use where there are space constraints (e.g. narrow spaces)
• design suitable for use in all positions

Features:
• working pressure: 700 bar
• cylinder performance: one stage
• cylinder piston: alloyed and enameled steel of high strength, resistant to corrosion and wear
• cylinder body: lacquered, corrosion resistant
• quick coupling: R2 3/8''*when choosing a pump for a hydraulic cylinder, the following must be ensured:
-> working pressure of the pump = working pressure of the hydraulic cylinder
-> pump oil working (usable) capacity ≥ hydraulic cylinder oil capacity

This product has multiple variants. The options may be chosen on the product page

Universal plate clamp type PCD-HRC50 RX-lift

• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 50 HRC (490 HB)
• for materials with high surface hardness (hardox 400, hardox 450, hardox 500)
• jaw opening from 0 to 50 mm
• temperature of use form -40 to 100°C

This product has multiple variants. The options may be chosen on the product page

Vertical plate clamp for stainless steel type NMVC RX-lift

• EN 13155
• vertical lifting and transporting of plates, sheets and structures made of stainless steel, aluminum, wood, marble, stone and other materials whose surface can be damaged during lifting operations
• safety mechanism
• equipped with a chain lifting master link (shackle) for flexible manipulation and lifting
• jaws (blocks) are made of anti-friction special synthetic material which ensures non-marking during lifting
• for materials where is important to ensure non-marking (non-damage) of load surface
• no minimal working load limit (WLL)
• working temperature from -10 to 60°C

This product has multiple variants. The options may be chosen on the product page

Vertical rail clamp type RC RX-lift

• EN 13155
• vertical lifting, transport and manipulation of rails
• for rail sizes S49, S54, S60s, UIC60
• safety lock mechanism in close position
• practical and simple operating
• temperature of use form -20 do 100 °C

This product has multiple variants. The options may be chosen on the product page

Whipcheck safetly cable RX-lift

• whipcheck safetly cable with spring for securing pressure hoses
• material: steel

• possibility of making whipcheck safetly cable with different braking forces, diameters and lengths

This product has multiple variants. The options may be chosen on the product page