Lever chain hoist type HSH-A619 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• optimized load chain guidance system.
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• brake system: automatic safety load brake with two friction discs , ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, withstands external impacts without damaging the bearings and provides protection against dust and water
• optimized load chain guidance system.
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• brake system: automatic safety load brake with two friction discs , ratchet disc and two pawl
• possibility of installing mobile end ring (chain shortening clutch)
| Model | |
|---|---|
| Capacity (t) | |
| Proof load (kN) | |
| Load chain dim. (mm) | |
| Chain Fall | |
| Standard lifting height (m) | |
| Load lifting force (N) | |
| A (mm) | 148, 17,6, 195 |
| B (mm) | 109, 102, 88 |
| C (mm) | 135, 162, 211, 254, 319 |
| H min. (mm) | 320, 380, 480, 620, 700, 318 |
| L (mm) | 290, 420 |
| D (mm) | 50, 85, 37, 64, 45 |
| K (mm) | 48, 26, 32,5, 50, 38 |
| Net weight (kg) | |
| Ext. weigh. per 1 m chain (kg) |
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Concrete pipe clamp type PLG RX-lift
• EN 13155
• vertical transportation of concrete pipe sections up to 2 m in diameter
• clamps are used in combination with three-leg sling in sets of three clamps
• total capacity is stated for sets of three clamps
• clams have solid construction and simple manipulation
• for concrete according to DIN 4034
Drum clamp type LQ RX-lift
Geared anti-corrosion trolley type SSGCL RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity)
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• humidity: up to 100 % (not suitable for underwater use)
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher liftings heights)
• the possibility of delivering carts with a larger width (for larger beams)
Plain sparkproof trolley type EXGCT ATEX RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels and suspension plate (link) are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


