Geared anti-corrosion trolley type SSGCL RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity)
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• humidity: up to 100 % (not suitable for underwater use)
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher liftings heights)
• the possibility of delivering carts with a larger width (for larger beams)
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity)
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• humidity: up to 100 % (not suitable for underwater use)
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher liftings heights)
• the possibility of delivering carts with a larger width (for larger beams)
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Drum clamp type TDV RX-lift
Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Snatch block with shackle for forestry logging DS-B029 RX-lift
Universal plate clamp type PCD RX-lift
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C


