Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
| Model | GCL810-005, GCL810-010, GCL810-020, GCL810-030, GCL810-050, GCL810-100 |
|---|---|
| Capacity (t) | 0,5, 1,0, 2,0 |
| Test force (t) | |
| I-beam width (mm) | 110-305, 116-305, 130-305 |
| A (mm) | 388, 405,5, 369, 432, 507,5, 592, 490, 336,5, 356,5 |
| B (mm) | 212, 248, 293, 350, 382, 467 |
| C (mm) | 184, 223,5, 267,5, 322, 372, 483 |
| D (mm) | 46, 22, 28, 34, 42, 72 |
| E (mm) | 36,5, 40, 30, 34,5, 29,5 |
| F (mm) | ≈3, ≈5 |
| G (mm) | 102,5, 273, 123, 173,5, 200, 147 |
| Min. radius (m) | |
| Net weight (kg) |
Related products
Concrete pipe clamp type PLG RX-lift
• EN 13155
• vertical transportation of concrete pipe sections up to 2 m in diameter
• clamps are used in combination with three-leg sling in sets of three clamps
• total capacity is stated for sets of three clamps
• clams have solid construction and simple manipulation
• for concrete according to DIN 4034
Drum clamp type TDV RX-lift
Geared anti-corrosion trolley type SSGCL RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity)
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• humidity: up to 100 % (not suitable for underwater use)
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher liftings heights)
• the possibility of delivering carts with a larger width (for larger beams)
Snatch block with hook DSPB-F1
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook


