Vertical plate clamp type JCD RX-lift
• EN 13155
• vertical lifting and transport of steel plate and construction (max. side angle 15°)
• safety lock mechanism
• in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 60 mm
• temperature of use form -40 to 100°C
• EN 13155
• vertical lifting and transport of steel plate and construction (max. side angle 15°)
• safety lock mechanism
• in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 60 mm
• temperature of use form -40 to 100°C
Related products
Beam clamp type WJC RX-lift
Drum clamp type LR RX-lift
Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Plain sparkproof trolley type EXGCT ATEX RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels and suspension plate (link) are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


