Permanent magnetic lifter PML RX-lift
• lifting and transport of the ferromagnetic materials like plates,
blocks and round profiles
• temperature of use from -40 °C to 80 °C
• safety factor: 3,5:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is
attached
• lifting and transport of the ferromagnetic materials like plates,
blocks and round profiles
• temperature of use from -40 °C to 80 °C
• safety factor: 3,5:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is
attached
| Model | |
|---|---|
| Capacity (kg) | |
| Load capacity on the cylindrical element (kg) | |
| Breaking force (kN) | |
| A (mm) | 180, 295, 460, 550, 95, 360, 221 |
| B (mm) | 450, 85, 217, 291, 175, 590, 350 |
| C (mm) | |
| D (mm) | 140, 80, 85, 125, 175, 186, 235 |
| E (mm) | 290, 140, 130, 300, 217, 270, 340 |
| F (mm) | 155, 235, 265, 426, 520, 650, 185 |
| G (mm) | 105, 100, 82, 30, 69, 52 |
| H (mm) | 102, 230, 52, 68, 134, 140 |
| Net weight (kg) |
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Beam clamp type WJC RX-lift
Hand winch type BHW RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort
Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL
* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)


