Lifting swivel screw point with bearing G80 RX303

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1
• allows 360° vertical rotation under full load, safe tipping and flipping of the load (e.g. from vertical to horizontal position) and lifting at a 90° angle
• indicated capacity (WLL) is given for the worst condition of use at and angle of 90° (at angle of 0° the load capacity is higher)

Features:
• safety factor: 4:1
• material: alloy steel, grade 8
• finish: plastic coated (red)
• working temperature: -40°C up to 200°C

Additional features:
• non-removable special bolt
• non-standard length and thread type (e.g. pipe thread or fine metric) are available on request

*only standard thread lengths (dimension E) are listed in the table

Varijacije
Size (mm) Capacity (t) on 90° Capacity (t) on 0° DxE (mm) B (mm) c (mm) G (mm) T (mm) A (mm) W (mm) N (mm) H (mm) S (mm) Weight (kg/piece) Napomena Dodaj na ponudu
M8 0,3 0,6 M8X13 36 16.5 51 41 55 30 14 3 1 0,45
M10 0,5 1,0 M10X15 36 16.5 51 41 55 30 14 3 1 0,45
M12 0,5 1,0 M12X18 36 16.5 51 41 55 30 14 3 1 0,46
M16 1,12 2,0 M16X20 36 16.5 52 42 55 30 14 3 1 0,47
M16 1,12 2,0 M16X30 36 16.5 52 42 55 30 14 3 1 0,49
M20 2,0 4,0 M20X30 49.5 19 68 56 70 35 16 3.5 1 0,99
M24 3,15 6,3 M24X30 57 22 78 65.5 85 40 18 3.5 1.5 1,33
M30(5T) 5,3 10,6 M30X35 66 23.5 96.5 80.5 85 40 20 4 1.5 2,30
M30(5T) 5,3 10,6 M30X38 66 23.5 96.5 80.5 85 40 20 4 1.5 2,30
M30(8T) 8,0 11,8 M30X35 80 28 112 92 115 50 22 6 2 3,73
M30(8T) 8,0 11,8 M30X38 80 28 112 92 115 50 22 6 2 3,73
M36 8,0 11,8 M36X50 80 27 109 89.5 115 50 22 6 2 3,88
M42 10,0 15,0 M42X50 80 27 109 89.5 115 50 25 6 2.5 4,46
M48 10,0 15,0 M48X50 80 27 109 89.5 115 50 25 6 2.5 4,62
M56 15,0 25,0 M56X84 117 42 310 280 152 70 32 7 2.5 11,8
M64 20,0 28,0 M64X95 117 42 310 280 152 70 32 7 2.5 12,5
Description

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1
• allows 360° vertical rotation under full load, safe tipping and flipping of the load (e.g. from vertical to horizontal position) and lifting at a 90° angle
• indicated capacity (WLL) is given for the worst condition of use at and angle of 90° (at angle of 0° the load capacity is higher)

Features:
• safety factor: 4:1
• material: alloy steel, grade 8
• finish: plastic coated (red)
• working temperature: -40°C up to 200°C

Additional features:
• non-removable special bolt
• non-standard length and thread type (e.g. pipe thread or fine metric) are available on request

*only standard thread lengths (dimension E) are listed in the table

SKU: okretni-vijak-s-alkom-g80-rx303 Categories: , Tags: , ,