Our product portfolio
Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.
Horizontal plate clamp type HPC RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal plate clamp type JPD (LC) RX-lift
• EN 13155
• horizontal lifting and transport of thin steel plates, beam profiles and bending sheets
• reverse jaw enables transport of the sheets that tend to bend during lifting or manipulation of beam profiles (gripping on the side of the beam or profile flipping)
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal plate clamp type PPD RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal plate clamp type THK RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in "tripod" configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Horizontal steel and concrete pipe clamp type TPH RX-lift
Hvataljka za čelične cijevi tip YG RX-lift
Magnetic hand lifter MAG50
• EN 13155
• lifting and transport of the ferromagnetic materials like plates and blocks up to 50 kg
• temperature of use from -10 °C to 60 °C
• safety factor: 3:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is attached
• can only be used for handling material manually (lifting of load fixed to a magnetic hand lifter with another lifting equipment is forbidden)
Permanent magnetic lifter PML RX-lift
• lifting and transport of the ferromagnetic materials like plates,
blocks and round profiles
• temperature of use from -40 °C to 80 °C
• safety factor: 3,5:1
• the lifting capacity depends on the thickness and chemical composition
of the material and roughness of the surface to which the lifter is
attached
Universal plate clamp type IPU10 Crosby
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 37 HRC (450 HB)
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C
• 10 year of warranty
• manufacturers web page: https://www.thecrosbygroup.com/products/lifting-clamps/vertical/standard/crosby-ipu10-vertical-lifting-clamps/?language=en
Universal plate clamp type PCD RX-lift
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C
Universal plate clamp type PCD-HRC50 RX-lift
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 50 HRC (490 HB)
• for materials with high surface hardness (hardox 400, hardox 450, hardox 500)
• jaw opening from 0 to 50 mm
• temperature of use form -40 to 100°C


