Our product portfolio

Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.

Sold out

Beam clamp type JG RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt

Electric hoist chain Grade 8 type DT

Specification:
• in general according to FEC
• high tensile steel chain for electric hoist
• country of origin: Japan

Features:
• material: high tensile steel grade 8 (type DT acc. to EN 818-7)
• fine tolerance calibrated chain links
• working temperature: -10 °C to +200 °C (WLL 100 %)
• finish: natural color (oiled)
• surface hardness: min. 550HV (except chains with a diameter 11.2 mm which have min. 500HV)

This product has multiple variants. The options may be chosen on the product page

Eye hook with safety latch AISI 316 S320 RX-lift

Specification:
• stainless steel eye hook with safety latch made of AISI 316 stainless steel
• intended for use in applications where other corrosion protection measures are not sufficient (food, petrochemical or nuclear industry, nautic or fishing, etc.)
• used in combination with other elements made of stainless steel (e.g. stainless steel wire ropes)

Features:
• safety factor: 3:1
• material: stainless steel AISI 316
• finish: polished

This product has multiple variants. The options may be chosen on the product page
Sold out

Geared anti-corrosion trolley type SSGCL RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157 (DNV certificate on request)
• designed to work in marine conditions (environments with high humidity and salinity)
• covers and external surfaces painted with an agent achieving protection class C5-M, according to ISO 12944 classification
• screws, nuts and washers made of stainless steel
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters

Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• humidity: up to 100 % (not suitable for underwater use)
• load type: goods, not suitable for lifting people

Additional features:
• possibility of extending the hand chain (for higher liftings heights)
• the possibility of delivering carts with a larger width (for larger beams)

Geared sparkproof trolley type EXGCL RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels, suspension plate (link) and hand chain wheel are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) and “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters

Features:
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people

Additional features:
• possibility of extending the hand chain
• the possibility of delivering carts with a larger width (for larger beams)

This product has multiple variants. The options may be chosen on the product page
Sold out

Geared trolley type GCL 810 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters

Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people

Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)

High tensile steel big mouth bow shackle with safety bolt RX191

Specification:
• complies with the Machinery Directive 2006/42/EC
• high tensile steel big mouth bow shackle with wide shackle body and mouth that enables you to connect the shackle to a connecting point which is wider than usual (e.g. a pad eye)
• contains safety bolt, nut and cotter pin that accidental unscrewing of the bolt
• for use in permanent joints where assembly and disassembly are infrequent
• intended for use in 1-leg or multi-leg systems/configurations (e.g. 1-leg or 2-leg steel wire rope slings)

Features:
• safety factor: 6:1
• material: high tensile steel Grade 8, quenched and tempered
• finish: hot dipped galvanized
• working temperature: -20°C up to +200°C

This product has multiple variants. The options may be chosen on the product page

High tensile steel bow shackle with safety bolt G2130 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel bow shackle with safety bolt, nut and cotter pin that accidental unscrewing of the bolt
• for use in permanent joints where assembly and disassembly are infrequent
• intended for use in 1-leg or multi-leg systems/configurations (e.g. 1-leg or 2-leg steel wire rope slings)

Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized or bright
• working temperature: -40°C up to +200°C

This product has multiple variants. The options may be chosen on the product page
Sold out

High tensile steel bow shackle with screw collar pin G209 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel bow shackle which allows quick assembly/disassembly
• suitable for use where assembly and disassembly occur relatively frequently
• intended for use in 1-leg or multi-leg systems/configurations (e.g. 1-leg or 2-leg steel wire rope slings)

Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized or bright
• working temperature: -40°C up to +200°C

Sold out

High tensile steel dee shackle with safety bolt G2150 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel dee shackle with safety bolt, nut and cotter pin that accidental unscrewing of the bolt
• for use in permanent joints where assembly and disassembly are infrequent
• intended for use in 1-leg systems/configurations only (e.g. 1-leg steel slings)

Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized
• working temperature: -40°C up to +200°C

Sold out

High tensile steel dee shackle with screw collar pin G210 RX-lift

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13889
• high tensile steel dee shackle which allows quick assembly/disassembly
• suitable for use where assembly and disassembly occur relatively frequently
• intended for use in 1-leg systems/configurations only (e.g. 1-leg steel wire rope slings)

Features:
• safety factor: 6:1
• material: high tensile steel, quenched and tempered
• finish: hot dipped galvanized or bright
• working temperature: -40°C up to +200°C

Hvataljka za čelične cijevi tip YG RX-lift

• za horizontalan transport cilindričnih materijala (cijevi, šipke)
• prihvat materijala u 4 točke (vrlo mali otisak čeljusti na materijal)
• sigurnosni mehanizam
• za dizanje materijala temperature do 100 °C