Our product portfolio

Explore a wide selection of high-quality equipment for lifting, moving, and securing loads. Choose products that deliver reliability and long-lasting performance in professional use.

Lifting chain Grade 10 type KLA Gunnebo

Specification:
• in general according to EN 818-2 (WLL + 25 %) and ASTM A973/973M
• high tensile steel chain for lifting and lashing purposes
• most often used as part of lifting chain sling (EN 818-4) or lashing chain with ratchet load binder (EN 12195-3)
• intended for dynamic and static loads
• 25 % increased working load limit and minimum breaking force that chain grade 8
• country of origin: Sweden

Features:
• material: high tensile steel grade 10
• safety factor: 4:1
• calibrated chain links: max. dimensional deviation +/- 3%
• working temperature: -40 °C to + 200 °C (WLL 100 %)
• finish: painted (blue)

Additional features:
• available compatible elements grade 10
• available chains with increased operating temperature up to +400 °C

This product has multiple variants. The options may be chosen on the product page

Lifting chain Grade 8 RX-lift

Specification:
• according to EN 818-2 (DIN 5687)
• high tensile steel chain for lifting and lashing purposes
• most often used as part of lifting chain sling (EN 818-4) or lashing chain with ratchet load binder (EN 12195-3)
• intended for dynamic and static loads

Features:
• material: high tensile steel grade 8
• safety factor: 4:1
• calibrated chain links: max. dimensional deviation +/- 3%
• working temperature: -40 °C to +200 °C (WLL 100 %)
• finish: electrophoresis (black) or natural color

Additional features:
• available compatible elements grade 8
• available chains with increased surface hardness

This product has multiple variants. The options may be chosen on the product page

Lifting swivel screw point with bearing G80 RX303

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1
• allows 360° vertical rotation under full load, safe tipping and flipping of the load (e.g. from vertical to horizontal position) and lifting at a 90° angle
• indicated capacity (WLL) is given for the worst condition of use at and angle of 90° (at angle of 0° the load capacity is higher)

Features:
• safety factor: 4:1
• material: alloy steel, grade 8
• finish: plastic coated (red)
• working temperature: -40°C up to 200°C

Additional features:
• non-removable special bolt
• non-standard length and thread type (e.g. pipe thread or fine metric) are available on request

*only standard thread lengths (dimension E) are listed in the table

This product has multiple variants. The options may be chosen on the product page

Manual hoist chain Grade 8 type T RX-lift

Specification:
• in general according to EN 818-7
• high tensile steel chain for manual hoist or lever hoist

Features:
• material: high tensile steel grade 8 (type T acc. to EN 818-7)
• fine tolerance calibrated chain links
• working temperature: -40 °C to +200 °C (WLL 100 %)
• finish: electro-galvanized, hot dipped galvanized or painted (black)

This product has multiple variants. The options may be chosen on the product page

Master link assembly G80 A346 RX032

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1 (EN 1677-4)
• master link assembly intended for use in 3-leg or 4-leg systems/configurations (e.g. 3-leg or 4-leg chain slings)
• the flat on the connection eyes enables the assembly with other components (e.g. thimble)

Features:
• safety factor: 4:1
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C

This product has multiple variants. The options may be chosen on the product page

Master link assembly G80 A347 RX094

Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1 (EN 1677-4)
• master link assembly intended for use in 3-leg or 4-leg systems/configurations (e.g. 3-leg or 4-leg steel wire rope slings)
• the flat on the connection eyes enables the assembly with other components (e.g. thimble)

Features:
• safety factor: 4:1
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C

This product has multiple variants. The options may be chosen on the product page