Horizontal plate clamp type PPD RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
Related products
Beam clamp type JG RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13155
• vertical lifting and transport beam ("I" and "H" )profiles
• can be used as upside down attached (temporary) lifting point
• easy installation on beam, wide jaw opening
• adjustable by turning the safety threaded bolt
Beam clamp type WJC RX-lift
Drum clamp type LQ RX-lift
Transport trolley RX-lift
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm


