Drum clamp type LS RX-lift
| Capacity (t) |
|---|
| Grip opening (mm) |
| Chain length (mm) |
Related products
Drum clamp type LR RX-lift
Drum clamp type TDV RX-lift
Hand winch type BHW RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• suitable for lifting and pulling applications
• breaking through worm wheel gearing
• efficient gearing minimises the required operator effort
Features:
• compact design with detachable lever
• comfortable handle with easy grip
• material: steel (galvanized) or stainless steel
• supplied without steel wire rope
• minimum load: 5 % WLL
* the wanted steel wire rope length and end terminal must be specified in the note (e.g. 20 m with swaged hard eye and eye hook with safety latch at the end)
Plain sparkproof trolley type EXGCT ATEX RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments
• wheels and suspension plate (link) are made of copper or copper-plated
• safety bars with rubber/plastic buffers serve as fall and impact protection
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)
Snatch block with hook DSPB-F1
Specification:
• complies with the Machinery Directive 2006/42/EC
• demountable pulley with a swivel hook designed for lifting and/or pulling loads
• designed to increase pulling capacity, line direction change and allows mid-line access (easy installation of the steel wire rope on the middle of the pulling line without threading it from the end)
Features:
• body material: steel
• sheave material: forged steel
• hook material: forged steel
Additional features:
• possibility of supply the snatch block with shackle instead swivel hook


