Lifting swivel screw point with bearing G80 RX303
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1
• allows 360° vertical rotation under full load, safe tipping and flipping of the load (e.g. from vertical to horizontal position) and lifting at a 90° angle
• indicated capacity (WLL) is given for the worst condition of use at and angle of 90° (at angle of 0° the load capacity is higher)
Features:
• safety factor: 4:1
• material: alloy steel, grade 8
• finish: plastic coated (red)
• working temperature: -40°C up to 200°C
Additional features:
• non-removable special bolt
• non-standard length and thread type (e.g. pipe thread or fine metric) are available on request
*only standard thread lengths (dimension E) are listed in the table
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1
• allows 360° vertical rotation under full load, safe tipping and flipping of the load (e.g. from vertical to horizontal position) and lifting at a 90° angle
• indicated capacity (WLL) is given for the worst condition of use at and angle of 90° (at angle of 0° the load capacity is higher)
Features:
• safety factor: 4:1
• material: alloy steel, grade 8
• finish: plastic coated (red)
• working temperature: -40°C up to 200°C
Additional features:
• non-removable special bolt
• non-standard length and thread type (e.g. pipe thread or fine metric) are available on request
*only standard thread lengths (dimension E) are listed in the table
| Size (mm) | |
|---|---|
| Capacity (t) on 90° | |
| Capacity (t) on 0° | |
| DxE (mm) | M27X35, M8X13, M30X35, M20X30, M48X50, M36X90, M36X50, M10X15, M30X38, M16X20, M39X50, M16X30, M12X18, M42X50, M64X95, M24X30, M14X20, M36X54, M56X84 |
| B (mm) | 117, 49.5, 36, 80, 66, 57 |
| c (mm) | 42, 16.5, 27, 23.5, 22, 28, 19 |
| G (mm) | 310, 96.5, 68, 109, 51, 78, 112, 52 |
| T (mm) | 42, 41, 280, 56, 80.5, 89.5, 65.5, 92 |
| A (mm) | 70, 85, 152, 55, 115 |
| W (mm) | 50, 30, 35, 70, 40 |
| N (mm) | 14, 22, 32, 20, 25, 18, 16 |
| H (mm) | 3.5, 6, 4, 3, 7 |
| S (mm) | 2, 1, 2.5, 1.5 |
| Weight (kg/piece) |
Related products
Master link G80 A343 RX033
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 1677-1 (EN 1677-4)
• master link intended for use in 1-leg or 2-leg systems/configurations (e.g. 1-leg or 2-leg chain slings)
• the flat on the eye enables the assembly with other components (e.g. thimble)
Features:
• safety factor: 4:1
• material: alloy steel Grade 8
• finish: painted red (RAL 3020)
• working temperature: -40°C up to +200°C


