• electric trolleys for electric hoist SHH-A type DC-C RX-lift
• EN 14492-2
• voltage: 380V 50Hz 3Ph
| Model | DC-C-010-D, DC-C-020-D, DC-C-030-D, DC-C-050-D |
|---|---|
| Capacity (t) | 2, 3, 5, 1, 10 |
| Travel speed (m/min) | 18,0/6,0, 20,0/6,7 |
| I-beam width (mm) | 100-170, 70-140 |
| A (mm) | 36, 40, 24, 30 |
| B (mm) | 22, 16, 14 |
| C (mm) | 380, 260, 280, 340 |
| D (mm) | 20,5, 14,5, 140, 210 |
| F (mm) | 370, 340, 410 |
| G (mm) | 75, 68, 110, 96 |
| M (mm) | 340, 410, 336, 338 |
| N (mm) | 405, 410 |
| Net weight (kg) | 33, 40, 56, 76 |
Related products
Chain shortening end stop ring (for lever hoist) type ER RX-lift
Specification:
• chain shortening end stop ring intended for installation on a lever hoist type HSH-A619 RX-lift or HSH-816 RX-lift Premium
• it is installed instead of the suspension end anchor point at the end of the chain
• enables shortening of the load chain -> makes handling easier
Geared trolley type GCL 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
• standard hand chain length is 3,0 meters
Features:
• hand chain: galvanized
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• possibility of extending the hand chain (for higher lifting height)
• the possibility of delivering carts with a larger width (for larger beams)
Manual chain hoist type HSZ-A810 RX-lift
• EN 13157
• load chain EN 818-7, el. galvanized
• double breaking system
• lightweight and sturdy steel body
• cast upper and lower hook
• housing finish: double lacquered (green)
• compatible with trolleys for that manual chain hoist: type GCT (standard) and GCL (chain operated)
• less chain fall number (compared to the model HSH-A619)
Manual chain hoist type TV 5 times increased speed RX-lift PREMIUM
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality cylindrical roller bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, double lacquered, suitable for hard working conditions, withstands external impacts without damaging the bearings and provides protection against dust and water
• the automatic speed change transmission system enables 5 times increased lifting speed
Features:
• hooks: drop-forged steel hooks with cast latch
• load chain: galvanized acc. to EN 818-7 (type T)
• hand chain: galvanized
• working temperature: -10°C up to 50°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no
• brake system: automatic safety load brake with two friction discs and ratchet disc and two pawl
• possibility of installing compatible trolleys for manual chain hoist: type TPR RX-lift Premium and TGR RX-lift Premium
• possibility of installing chain bag
Premium features:
• enhanced housing -> increased protection of internal parts
• enhanced gear and axle bearings -> increased stability and effectiveness during operation
• equipped with patented load sensing automatic speed transmission which enables automatic speed change from the operating mode when the crane is unloaded to the mode when the crane is under load -> reduced operator effort and working time, 5 times increased lifting speed (without load), increased ergonomics
• the automatic speed change transmission system enables smooth speed change between high (when the crane is unloaded) and standard speed (when the crane is under load), without the existence of a neutral position -> greater reliability and safety
Manual spark proof ATEX chain hoist type EX-F3 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments, maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• robust high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: copper-plated drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• hand chain: stainless steel
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
• possibility of installing chain bag
Plain trolley type GCT 810 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• customizable by adjusting the spacers
• permanently lubricated, ball bearing mounted wheels allow for smooth traversing
• suitable for most “I” (IPE) i “H” (HEA, HE, HL, HD) beams
Features:
• working temperature: -10°C up to 60°C
• ATEX zone: not suitable
• load type: goods, not suitable for lifting people
Additional features:
• the possibility of delivering carts with a larger width (for larger beams)
Spark proof ATEX lever hoist type EX-L3 RX-lift
Specification:
• complies with the Machinery Directive 2006/42/EC and standard EN 13157
• complies with ATEX Directive 2014/34/EU (ATEX certificate on request)
• designed for work in potentially dangerous and explosive environments, maintenance friendly design, brake and transmission are easy to access
• the transmission is supported by high-quality bearings
• precision machined shafts, chain sprocket and gears ensure smooth operation
• high strength casing, withstands external impacts without damaging the bearings and provides protection against dust and water
Features:
• hooks: copper-plated drop-forged steel hooks with latch
• load chain: hot dipped galvanized acc. to EN 818-7 (type T)
• working temperature: -10°C up to 60°C
• ATEX zone: Ex II 2 GD c II C T4 IIIC T135°C
• load type: goods, not suitable for lifting people
Additional features:
• overload protection: no (possible installation)
• brake system: automatic safety load brake with twin friction discs and pawls
Spring balancer type HW
Specifications:
• balancing, hanging and manipulation of various hand tools such as electric or pneumatic screwdrivers, hand marking machines, measuring instruments, etc.


